Kia Forte: Console Armrest Replacement
| •
|
Put on gloves to protect your hands.
|
|
| •
|
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related
parts, to prevent damage.
|
| •
|
Use a plastic panel removal tool to remove interior trim
pieces to protect from marring the surface.
|
| •
|
Take care not to bend or scratch the trim and panels.
|
|
|
1. |
Remove the rear console cover.
(Refer to Floor Console - "Rear Console Cover")
|
|
2. |
Loosen the console armrest mounting screws (A).

|
|
3. |
After loosening the mounting screws, then remove the console armrest
(A).

|
|
4. |
Install in the reverse order of removal.
|
• |
Replace any damaged clips.
|
|
|
See also:
Hub nut tightening sequence
Tighten the hub nuts as follows.
Tightening torque:
88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)
...
Oil Pump Components
1. Oil pump cover
2. Oil pump housing
3. Driven gear
4. Drive gear
5. Oil seal
6. Bushing-housing
7. Reaction shaft
8. Bushing-reaction shaft
9. Sleeve
10. Bo ...
Replacement
When the receiver first arrives for replacement:
1)
It will be in Virgin State.
...