Never attempt to measure the circuit resistance of the airbag
module (squib) even if you are using the specified tester. If the circuit
resistance is measured with a tester, accidental airbag deployment will
result in serious personal injury.
|
Transaxle Oil Temperature Sensor Installation
1.
Install in the reverse order of removal.
After replacement or reinstal ...
Manifold Absolute Pressure Sensor (MAPS) Removal
1.
Turn the ignition switch OFF and disconnect the battery negative
(-) cable.
2.
Disconnect the manifold absolute pressure sensor connecto ...
Door Switch Removal
1.
Remove the door switch (A) after loosening the bolt.
...