Kia Forte: Hood Latch Release Handle Replacement

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Body (Interior and Exterior) / Hood / Hood Latch Release Handle Replacement

1.	After loosening the mounting screw, then remove the hood latch release handle (A).

2.

Install in the reverse order of removal.

•	Make sure the hood latch cable is connected properly.

•	Make sure the hood locks/unlocks and opens/closes properly.

Hood Latch Release Handle Component Location

1. Hood latch release handle ...

Hood Latch Component Location

1. Hood latch assembly ...

See also:

Power Outside Mirror Switch Inspection
1. Disconnect the power door mirror switch module connector from front door trip panel. 2. Check for the continuity between termina ...

Rear Door Belt Inside Weatherstrip Replacement
(4Door, 5Door) 1. Remove the rear door trim. (Refer to Rear Door - "Rear Door Trim") 2. Remove the rear door bel ...

Installation
• If the oil seal on the transaxle case side is damaged and fluid is leaking, replace th ...

Categories

Copyright © www.kifomanual.com 2014-2025