Kia Forte: Hood Latch Component Location

Hood Latch Release Handle Replacement

1. After loosening the mounting screw, then remove the hood latch release handle (A). 2. Install in the reverse order of removal. ...

Hood Latch Replacement

1. Disconnect the hood latch connector (A). 2. Remove the hood latch assembly (A) mounting bolts. Tightening ...

See also:

Oil Pump Inspection
1. Remove the relief plunger. Remove the plug (A), spring (B) and relief plunger (C). Tightening torque Plug (A) : ...

Oil Pump Unit (OPU) Inspection
OPU Problem Inspection Procedure 1. TEST OPU GROUND CIRCUIT: Measure resistance between OPU and chassis ground using the backside of OPU harness connector ...

Installation
   • If the oil seal on the transaxle case side is damaged and fluid is leaking, replace ...