(4Door, 5Door, 2Door) |
1. |
Remove the front door trim.
(Refer to Front Door - "Front Door Trim")
|
2. |
After loosening the mounting screws, then remove the front door
inside handle (A).
|
3. |
Install in the reverse order of removal.
|
Smart Key Diagnostic Inspection
Self Diagnosis With GDS
Smart key system defects can be quickly diagnosed with the GDS. GDS operates
actuator quickly to monitor, input/output value and self diagnosis.
The following thr ...
Teaching Procedures
1.
Key Teaching Procedure
Key teaching must be done after replacing a defective ECM or when
providing additional keys to the vehicle owner.
The procedure st ...
General Inspection
After or before servicing the EPS system, perform the troubleshooting
and test procedure as follows. Compare the system condition with normal condition
in the table below and if abnormal symp ...