(4Door, 5Door) |
1. |
Remove the rear door trim.
(Refer to Rear Door - "Rear Door Trim")
|
2. |
After loosening the mounting screws, then remove the rear door
inside handle (A).
|
3. |
Install in the reverse order of removal.
|
Engine Cover Removal and Installation
1.
Remove the engine cover (A).
•
...
Front Impact Sensor (FIS)
The front impact sensor (FIS) is installed in the front side member. They
are remote sensors that detect acceleration due to a collision at its mounting
location. The primary purpose of the F ...
Adjustment
Stop lamp switch clearance adjustment
If the gap between stop lamp switch and bracket is not 1.0 ~ 2.0mm(0.04~
0.08in), conform to below.
1.
Disconnect the s ...