Kia Forte: Rear Door Belt Inside Weatherstrip Replacement
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Body (Interior and Exterior) / Rear Door / Rear Door Belt Inside Weatherstrip Replacement
| (4Door, 5Door) |
| 1. |
Remove the rear door trim.
(Refer to Rear Door - "Rear Door Trim")
|
| 2. |
Remove the rear door belt inside weatherstrip (A).
|
| 3. |
Install in the reverse order of removal.
|
Rear Door Belt Outside Weatherstrip Replacement
(4Door, 5Door)
1.
Pull down rear door window glass by pressing the power window
glass switch.
2.
After loosening the mounting ...
Rear Door Side Weatherstrip Replacement
(4Door, 5Door)
1.
Loosen the rear door checker (B) mounting bolt.
Tightening torque:
16.7 ~ 25.5 N.m (1.7 ~ 2.6 kgf.m,12.3 ~ ...
See also:
Piston and Connecting Rod Disassembly
Engine removal is required for this procedure.
•
Use fender covers to avoid damaging pain ...
In-car Sensor (DATC only) Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Remove the center fascia panel.
(Refer to Body - "Center Fascia Panel")
...
Fuel Pump Motor Installation
1.
Install in the reverse order of removal.
...
Categories
- Home
- Kia Forte BD 2019-2026 Owners Manual
- Kia Forte BD 2019-2026 Service Manual
- First Generation
- Second generation
- Kia Forte TD 2014-2018 Owners Manual
- Kia Forte TD 2014-2018 Service Manual
Copyright � www.kifomanual.com 2014-2026