Kia Forte: Front Mud Guard Replacement - Body Side Moulding - Body (Interior and Exterior) - Kia Forte TD 2014-2018 Service ManualKia Forte: Front Mud Guard Replacement

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Body (Interior and Exterior) / Body Side Moulding / Front Mud Guard Replacement

  
Put on gloves to protect your hands.
  
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Take care not to scratch the body surface.
1.
After loosening the mounting clip and screws, then remove the front mud guard (A).

2.
Install in the reverse order of removal.
  
Replace any damaged clips.
Rear Wheel Guard Replacement
   • Put on gloves to protect your hands. & ...

Rear Mud Guard Replacement
   • Put on gloves to protect your hands. & ...

See also:

Intake Manifold Removal and Installation
1. Remove the engine cover. 2. Disconnect the battery negative terminal. 3. Disconnect the wiring connectors a ...

Service Standard
Item Specification Ignition Timing (°) BTDC 5 ± 10 Idle Speed (rpm) A/C OFF Neutral, N, P-range 640 ± 100 D-range ...

Component Location
1. Rear glass defogger relay (Engine room relay box) 2. Rear glass defogger switch (A/C controller) 3. Rear glass defogger ...

Copyright www.kifomanual.com 2014-2026