|
|
1. |
Remove the floor console assembly.
(Refer to Floor Console - "Floor Console Assembly")
|
2. |
Loosen the rear console cover mounting screws (A).
|
3. |
After loosening the mounting screws, then remove the rear console
cover (A).
|
4. |
Install in the reverse order of removal.
|
Troubleshooting
Vehicle inspection
SYMPTOM CHART
Symptom
Suspect Area
Remedy (See page)
Squeak or grunt-noise from the front suspension,
occurs more in cold ambient t ...
Smart Key Diagnostic Inspection
Self Diagnosis With GDS
Smart key system defects can be quickly diagnosed with the GDS. GDS operates
actuator quickly to monitor, input/output value and self diagnosis.
The following thr ...
Back up lamp, Rear fog lamp
1. Take the lamp assembly out.
2. Remove the socket from the assembly by turning the socket counterclockwise
until the tabs on the socket align with the slots on the assembly.
3. Remove the bulb by ...