Kia Forte: Blower Motor Inspection
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Heating,Ventilation, Air Conditioning / Blower / Blower Motor Inspection
| 1. |
Connect the battery voltage and check the blower motor rotation.
|
| 2. |
If the blower motor voltage does not operate well, substitute
with a known-good blower motor and check for proper operation.
|
| 3. |
Replace the blower motor if it is proved that there is a problem
with it.
|
Blower Unit Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Remove the heater and blower assembly.
(Refer to Heater - "Heater Unit")
...
Blower Motor Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Disconnect the connector (A) of the blower motor.
3.
Remove ...
See also:
Fuel Tank Pressure Sensor (FTPS) Inspection
1.
Connect the GDS on the Data Link Connector (DLC).
2.
Measure the output voltage of the FTPS.
Specification:
...
Hood Insulator Pad Replacement
1.
Using a clip remover, detach the clips, and remove the hood insulator
pad (A).
...
Control Cable Adjustment
Select cable adjustment
1.
Remove the select cable snap pin (A) and then remove the select
cable (B) from the shift lever pin.
2.
...
Copyright © www.kifomanual.com 2014-2025