Kia Forte: Front Seat Frame Assembly Replacement
| •
|
Put on gloves to protect your hands.
|
|
| •
|
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related
parts, to prevent damage.
|
| •
|
Use a plastic panel removal tool to remove interior trim
pieces to protect from marring the surface.
|
| •
|
Take care not to bend or scratch the trim and panels.
|
|
|
1. |
Remove the front seat back cover.
(Refer to Front Seat - "Front Seat Back Cover")
|
|
2. |
Remove the front seat cushion cover.
(Refer to Front Seat - "Front Seat Cushion Cover")
|
|
3. |
After loosening the mounting bolts, then disconnect the front
seat back frame assembly (A) and front seat cushion frame assembly (B).
Tightening torque :
44.1 ~ 53.9 N.m (4.5 ~ 5.5 kgf.m, 32.5 ~ 39.8 lb-ft)
|
|
|
4. |
Install in the reverse order of removal.
|
• |
Remove the side air bag for replacing side air
bag installation seat.
(Refer to Restraint - "Side Airbag (SAB) Module")
|
|
• |
Before service, be fully aware of precautions
and service procedure relevant to air bag.
(Refer to Restraint - "Side Airbag (SAB) Module")
|
|
|
1. Front seat back frame assembly
2. Front seat cushion frame assembly
...
1. Front seat cushion track
...
See also:
Crankshaft Position Sensor (CKPS) Description
Crankshaft Position Sensor (CKPS) detects the crankshaft position and
is one of the most important sensors of the engine control system. If there
is no CKPS signal input, the engine may stop ...
Description
The hydraulic system consists of oil, an oil filter, an oil pump, and
a valve body (valves and solenoid valves). The oil pump is powered by the engine.
Automatic Transaxle Fluid (ATF) passes ...
Diagnosis procedure by using diagnostic device
As manual for diagnosis methods by using diagnosis device, the main contents
are as follows:
1.
Connect self-diagnosis connector(16pins) located in the lower
of driv ...
Front Seat Frame Assembly Component Location
Front Seat Cushion Track Component Location