Kia Forte: Rear Seat Belt Buckle Replacement
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Body (Interior and Exterior) / Rear Seat Belt / Rear Seat Belt Buckle Replacement
| (4Door) |
[LH]
| 1. |
Remove the rear seat cushion assembly.
(Refer to Rear Seat - "Rear Seat Assembly")
|
| 2. |
Loosen the mounting bolt, and then remove the rear seat belt buckle
[LH] (A).
|
| 3. |
Install in the reverse order of removal.
|
[RH]
| 1. |
Remove the rear center seat belt retractor.
(Refer to Rear Seat Belt - "Rear Center Seat Belt Retractor")
|
| 2. |
Loosen the mounting bolt, and then remove the rear seat belt buckle
[RH] (A).
|
| 3. |
Install in the reverse order of removal.
|
| (5Door) |
| 1. |
Remove the rear seat cushion assembly.
(Refer to Rear Seat - "Rear Seat Assembly")
|
| 2. |
Loosen the mounting bolt, and then remove the rear seat belt buckle
(A).
[LH]
[RH]
|
| 3. |
Install in the reverse order of removal.
|
Rear Seat Belt Buckle Component Location
(4Door)
1. Rear seat belt buckle [LH]
2. Rear seat belt buckle [RH]
(5Door)
1. Rear seat belt buckle [LH]
2. Rear seat belt bu ...
See also:
Installation
Clutch cover and disc should be replaced as a set.
1.
Apply grease on a disc spline ...
Overdrive Clutch Control Solenoid Valve(OD/C_VFS) Inspection
1.
Turn ignition switch OFF.
2.
Disconnect the Solenoid valve connector.
3.
Measure resistance between sensor ...
Ambient Temperature Sensor Description
The ambient temperature sensor is located at the front of the condenser
and detects ambient air temperature. It is a negative type thermistor; resistance
will increase with lower temperature, ...
Copyright © www.kifomanual.com 2014-2025