Kia Forte: Installation - Horn - Body Electrical System - Kia Forte TD 2014-2018 Service ManualKia Forte: Installation

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Body Electrical System / Horn / Installation

1.
Install the horn and connect the horn connector.
2.
Reassemble the front bumper cover.
Removal
1. Disconnect the negative (-) battery terminal. 2. Remove the front bumper cover. (Refer to Body - "Front Bumper Cover") ...

AVN System
...

See also:

Thermostat Components
1. Water inlet fitting 2. Thermostat 3. Bypass hose 4. Heater pipe & hose assembly ...

Rear Torsion Beam Axle Inspection
1. Check the hub for cracks and the splines for wear. 2. Check the rear axle carrier for cracks. ...

Components Location
1. Engine Control Module (ECM) 2. Manifold Absolute Pressure Sensor (MAPS) 3. Intake Air Temperature Sensor (IATS) 4. Engine Coolant Temperature Sensor (ECTS) 5. Throttle Positi ...

Copyright © www.kifomanual.com 2014-2024