Kia Forte: Horn

Installation

1. Install the multifunction switch. 2. Install the clock spring. 3. Install the steering column upper and lowe ...

Component Location

1. Horn switch 2. Horn relay (Engine room compartment) 3. Clock spring 4. Horn ...

See also:

Smart Key Diagnostic Inspection
Self Diagnosis With GDS Smart key system defects can be quickly diagnosed with the GDS. GDS operates actuator quickly to monitor, input/output value and self diagnosis. The following thr ...

Hub nut tightening sequence
Tighten the hub nuts as follows. Tightening torque: 88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)    ...

Rear Torsion Beam Axle Replacement
1. Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely supported. 2. Remove the front wheel and tire (A) from f ...