Kia Forte: Front Hub / Knuckle Inspection
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Driveshaft and axle / Front Axle Assembly / Front Hub / Knuckle Inspection
| 1. |
Check the hub for cracks and the splines for wear.
|
| 2. |
Check the brake disc for scoring and damage.
|
| 3. |
Check the knuckle for cracks.
|
| 4. |
Check the bearing for cracks or damage.
|
Front Hub / Knuckle Reassembly
1.
Install the hub bearing to the knuckle assembly.
(1)
Lay the knuckle assembly (A) on press.
(2)
...
Front Hub / Knuckle Installation
1.
Install in the reverse order of removal.
Use a SST (09581-11000) when ...
See also:
Trunk Lid Trim Replacement
(4Door, 2Door)
•
Put on gloves to protect your hands.
...
Compressor Installation
1.
Make sure the compressor mounting bolt with the correct length
is screwed in. Tighten the mounting bolts (A) with the specified tightening
order.
...
BJ Boot Replacement
1.
Remove the front driveshaft.
(Refer to Driveshaft Assembly - “Front Driveshaft”)
2.
Remove the TJ joint assembly.
(Refer to ...
Copyright © www.kifomanual.com 2014-2025