Kia Optima Manuals

Kia Forte: Seat Heater Inspection - Seat Electrical - Body Electrical System - Kia Forte TD 2014-2018 Service ManualKia Forte: Seat Heater Inspection

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Body Electrical System / Seat Electrical / Seat Heater Inspection

Front Seat
1.
Check for continuity and measure the resistance between terminals.

No.
 Description
 No.
 Description
1
 Heater (+)
 3
 NTC (-)
2
 NTC (+)
 4
 Heater (-)

Standard value (Fabric / Leather)
Cushion : 1.14 Ω ± 10%
Back: 1.04 Ω ± 10%
Set : 2.18 Ω ± 10%
2.
Operate the seat heater after connecting the connector, and then check the NTC by measuring the temperature of seat surface.

 1st
 2nd
 3rd
Cushion
(±2°C)
 36°C
 39°C
 42°C
Back
(±2°C)
 40°C
 45°C
 50°C

Second Seat
1.
Check fo continuity and measure the resistance between terminals.

No.
 Description
 No.
 Description
1
 Battery (+)
 5
 LED Low
2
 IGN 1
 6
 Ground
3
 LED High
 7
 Heater switch
4
 IGN 2
 8
 -

2.
Operate the seat heater after connecting the connector, and then check the thermostat by measuring the temperature of seat surface.

 1st
 2nd
Cushion
(±2°C)
 36°C
 39°C

Seat Heater (Non-Air Ventilation) Circuit Diagram
※ The cushion heater and back cushion are connected with wiring. ...

Air Ventilation Seat Unit Components Location
Components Location (1) 1. Seat back blower 2. Seat cushion blower 3. Air ventilation unit 4. Air ventilation switch Components Location (2) Components Locati ...

See also:

ETC (Electronic Throttle Control) System Installation
   • Install the component with the specified torques. • ...

Control Cable Inspection
1. Check the select cable for proper operation and for damage. 2. Check the shift cable for proper operation and for damage. ...

Parking Brake Lever Adjustment
Parking Brake Lever Stroke Adjustment 1. Remove the floor console. (Refer to Body group - "Floor console") 2. Apply the b ...

Categories


Copyright © www.kifomanual.com 2014-2024