Kia Forte: Rheostat Inspection
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Body Electrical System / Lighting System / Rheostat Inspection
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Remove the crash pad side switch assembly (A).
|
| 3. |
Disconnect the head lamp leveling switch connectors (A) from lower
crash pad switch.
|
| 4. |
Operate the rheostat switch and check for continuity between terminals.
|
Hazard Lamp Switch Installation
1.
Install the hazard switch.
2.
Install the center fascia panel.
...
Front Fog Lamps Inspection
1.
Disconnect the negative(-) battery terminal.
2.
Remove the lighting switch of the multi-function switch.
(Refer to Multifunction Swit ...
See also:
Oil Pressure Switch Removal and Installation
1.
Disconnect the oil pressure switch connector (A) and then remove
the oil pressure switch (B).
Tightening torque :
9.8 ~ 11.8N.m (1 ...
Installation
1.
Install in the reverse order of removal.
2.
After be equipped, perform bleeding air procedure in clutch release
cylinder after pouring ...
Engine Control Module (ECM) Installation
When replacing the ECM, the vehicle equipped with the immobilizer
must be performed procedure as below.
...
Copyright © www.kifomanual.com 2014-2025