Kia Forte: Turn Signal Lamp
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Body Electrical System / Lighting System / Turn Signal Lamp
Removal
| 1. |
Remove the outside rear view mirror.
(Refer to Body - "Outside Rear View Mirror")
|
Installation
| 1. |
Install the outside rear view mirror.
(Refer to Body - "Outside Rear View Mirror")
|
Rear Combination Lamp Installation
1.
Install the rear combination lamp (Inside) assembly.
2.
Install the rear combination lamp (outside) assembly.
...
Troubleshooting
1.
The lamp switch inputs can be checked using the GDS.
2.
To check the input value of lamp switch, select option "Body Control
Module ...
See also:
Seat Heater (Air Ventilation) Circuit Diagram
...
ETC (Electronic Throttle Control) System Inspection
Throttle Position Sensor (TPS)
1.
Connect the GDS on the Data Link Connector (DLC).
2.
Start the engine and measure the output voltage of TP ...
Removal
1.
Turn ignition switch OFF and disconnect the negative (-) battery
cable.
2.
Remove the battery (A) and ECM (B).
...
Copyright © www.kifomanual.com 2014-2024