Kia Forte: Checking the washer fluid level - Washer fluid - Maintenance - Kia Forte TD 2014-2018 Owners ManualKia Forte: Checking the washer fluid level

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Owners Manual / Maintenance / Washer fluid / Checking the washer fluid level

Check the fluid level in the washer fluid reservoir and add fluid if necessary.


Check the fluid level in the washer fluid reservoir and add fluid if necessary. Plain water may be used if washer fluid is not available.

However, use washer solvent with antifreeze characteristics in cold climates to prevent freezing.

WARNING - Windshield fluid

Do not drink the windshield washer fluid. The windshield washer fluid is poisonous to humans and animals.

WARNING - Flammable fluid

Do not allow the washer fluid to come in contact with open flames or sparks. The windshield washer fluid reservoir is flammable under certain circumstances. This can result in a fire.

Washer fluid
...

Parking brake
...

See also:

Removal
1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Disconnect the vacuum pump connector (A). ...

Inspection
1. Check the brake warning lamp in the IGN ON position.    Brake warnin ...

Installation
Pressure Side Impact Sensor 1. Install the new pressure side impact sensor with the screws (B) then connect the pressure side impact sensor connector (A). ...

Copyright www.kifomanual.com 2014-2026