Kia Forte: Ambient Temperature Sensor Description
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Heating,Ventilation, Air Conditioning / Air Conditioning System / Ambient Temperature Sensor Description
The ambient temperature sensor is located at the front of the condenser
and detects ambient air temperature. It is a negative type thermistor; resistance
will increase with lower temperature, and decrease with higher temperatures.
The sensor output will be used for discharge temperature control, temperature
regulation door control, blower motor level control, mix mode control and in-car
humidity control.
If the ambient temperature is below 0°C (32°F), the A/C compressor
will stop.
The compressor will operate manually.
|
Auto Defogging Sensor Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Disconnect the sensor cover (A) and then remove the auto defogging
sensor (B).
...
Ambient Temperature Sensor Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect ambient temperature sensor.
3.
Check the resistance of the ambie ...
See also:
Installation
1.
Install in the reverse order of removal.
2.
After be equipped, perform bleeding air procedure in clutch release
cylinder after pouring ...
Troubleshooting
Problem Symptoms Table
Before replacing or repairing air conditioning components, first determine
if the malfunction is due to the refrigerant charge, air flow or compressor.
Us ...
Rear Oil Seal Removal
1.
Remove the automatic transaxle.
(Refer to Automatic Transaxle System - "Automatic Transaxle")
Remove the manual transaxle.
(Refer to Manual ...
Copyright © www.kifomanual.com 2014-2025