Kia Forte: Blower Motor Inspection
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Heating,Ventilation, Air Conditioning / Blower / Blower Motor Inspection
| 1. |
Connect the battery voltage and check the blower motor rotation.
|
| 2. |
If the blower motor voltage does not operate well, substitute
with a known-good blower motor and check for proper operation.
|
| 3. |
Replace the blower motor if it is proved that there is a problem
with it.
|
Blower Unit Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Remove the heater and blower assembly.
(Refer to Heater - "Heater Unit")
...
Blower Motor Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Disconnect the connector (A) of the blower motor.
3.
Remove ...
See also:
Component Location
1. Driver power window switch
2. Door lock switch (Driver)
3. Passenger power window switch
4. Door lock switch (Passenger)
5. BCM (Body Control Module)
6. Front door loc ...
Intake Actuator Description
The intake actuator is located at the blower unit. It regulates the intake
door by the signal from the control unit. Pressing the intake selection switch
will shift between recirculation and ...
Seat Belt Switch Removal
1.
Remove the front seat.
2.
After loosening the mounting bolt, then remove the front seat
belt buckle (A).
...
Categories
- Home
- Kia Forte BD 2019-2026 Owners Manual
- Kia Forte BD 2019-2026 Service Manual
- First Generation
- Second generation
- Kia Forte TD 2014-2018 Owners Manual
- Kia Forte TD 2014-2018 Service Manual
Copyright www.kifomanual.com 2014-2026