Kia Forte: Spark Plug Removal - Ignition System - Engine Electrical System - Kia Forte TD 2014-2018 Service ManualKia Forte: Spark Plug Removal

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Engine Electrical System / Ignition System / Spark Plug Removal

1.
Remove the ignition coil.
(Refer to Ignition System - "Ignition Coil")
2.
Using a spark plug wrench, remove the spark plug (A).
  
Be careful that no contaminates enter into spark plug holes.

Spark Plug Cleaning
The combustion temporarily becomes unstable, due to the aged fuel and the carbon deposits accumulated on the spark plug(s) after long-term storage. [1st Method] 1. ...

Spark Plug Installation
1. Install in the reverse order of removal. Tightening torque: 14.7 ~ 24.5 N.m (1.5 ~ 2.5 kgf.m, 10.8 ~ 18.0 Ib-ft) ...

See also:

System Circuit Diagram
Terminal Function No. Function Wire color 1 GND Back 2 IG2 Red 3 Switch Signal White ...

Inspection
Component Inspection 1. Remove the clutch switch. (Refer to Clutch Switch - "Removal") 2. Push the clutch switch in the di ...

Purge Control Solenoid Valve (PCSV) Description
Purge Control Solenoid Valve (PCSV) is installed on the intake manifold and controls the evaporative purge between the canister and the intake manifold. It is a normally closed solenoid valve ...

Copyright © www.kifomanual.com 2014-2025