Kia Forte: Starter Components
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Engine Electrical System / Starting System / Starter Components
| [NON-ISG Type] |
| 1. Front bracket assembly 2. Magnet switch assembly 3. Lever 4. Reducer assembly 5. Lever stop |
6. Gasket sheet 7. Yoke assembly 8. Armature assembly 9. Brush holder assembly |
Starter Specification
Starter [Non-ISG type]
Item
Specification
Rated voltage
12 V, 1.2 kW
The number of pinion teeth
13
Performance
[No-load, 11 V] ...
See also:
Steering Column and Shaft Disassembly
Universal joint assembly
1.
Loosen the bolt (A) and then disconnect the universal joint assembly
from the steering column assembly.
Tightenin ...
Smart Key Unit Installation
Smart Key Unit
1.
Install the smart key unit and RF receiver.
2.
Connect the connector and install the smart key unit.
...
Engine Coolant Temperature Sensor (ECTS) Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the ECTS connector.
3.
Remove the ECTS.
4.
...
Copyright © www.kifomanual.com 2014-2025