Kia Forte: Starting System
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Engine Electrical System / Starting System
- Description
- Troubleshooting
- Starter Description
- Starter Specification
- Starter Components
- Starter Circuit Diagram
- Starter Removal
- Starter Installation
- Starter Disassembly (NON-ISG Type)
- Starter Reassembly
- Starter Inspection
- Starter Cleaning
- Starter Relay Inspection
Battery Sensor Installation
1.
Install in the reverse order of removal.
Battery sensor cable installation
bolt: 10.8 ~ 13.7 N.m (1.1 ~ 1.4 kgf.m, 8.0 ~10.1
lb-ft)
...
Description
The starting system includes the battery, starter, solenoid switch, ignition
switch, inhibitor switch (A/T), clutch pedal switch (M/T), ignition lock switch,
connection wires and the battery ...
See also:
Manifold Absolute Pressure Sensor (MAPS) Removal
1.
Turn the ignition switch OFF and disconnect the battery negative
(-) cable.
2.
Disconnect the manifold absolute pressure sensor connecto ...
Instrument Cluster Installation
1.
Connect the cluster connector.
2.
Install the cluster assembly.
3.
Install the cluster facia panel.
...
Copyright © www.kifomanual.com 2014-2025