Kia Forte: Positive Crankcase Ventilation (PCV) Valve Inspection
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Emission Control System / Crankcase Emission Control System / Positive Crankcase Ventilation (PCV) Valve Inspection
| 1. |
Insert a thin stick (A) into the PCV valve (B) from the threaded
side to check that the plunger movement.
|
Positive Crankcase Ventilation (PCV) Valve Removal
1.
Disconnect the vapor hose (A).
2.
Remove the PCV valve (B).
...
Positive Crankcase Ventilation (PCV) Valve Installation
1.
Installation is reverse of removal.
PCV Valve installation:
1.96 ~ 2.94 N.m (0.2 ~ 0.3 kgf.m, 1.45 ~ 2.17 lb-ft)
...
See also:
Auto Defogging Actuator Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the auto defogging connector.
3.
Verify that the auto defoggin ...
Cluster Fascia Panel Component Location
1. Cluster fascia panel
...
Power Seat Control Switch Inspection
1.
With the power seat switch in each position, make sure that continuity
exists between the terminals below. If continuity is not as specified,
replace the power seat ...
Copyright © www.kifomanual.com 2014-2025