[EVAP. Leakage Test] |
1. |
Select "Evap. Leakage Test".
|
2. |
Proceed with the test according to the screen introductions.
|
Line Pressure Control Solenoid Valve Inspection
1.
Turn ignition switch OFF.
2.
Disconnect the Solenoid valve connector.
3.
Measure resistance between sensor ...
ESC OFF Switch Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the crash pad side switch assembly (A).
3.
D ...
Rearview camera
The rear view camera will activate with the ignition switch on and the shift
lever in the R (Reverse) position.
Note- during initial start up, system may not display instantly due to the audio
...