1. |
Remove the crash pad side switch assembly (A) from the switch
panel on the crach pad of the driver's side.
|
2. |
Remove the ISG switch from the switch assembly.
|
3. |
Check the continuity between the switch 3 and 5 terminals as the
ISG OFF switch is engaged.
|
Door Switch Installation
1.
Install in reverse of removal.
...
Fuel Tank Pressure Sensor (FTPS) Inspection
1.
Connect the GDS on the Data Link Connector (DLC).
2.
Measure the output voltage of the FTPS.
Specification:
...
Cooling Fan Specifications
Item
Specification
Fan type
PULLER
Fan speed control
Resistor (HI-LOW-OFF)
Air flow rate [㎥/h (yd³/h)]
1,700 (2,22 ...