Kia Forte: Alternator Specification
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Engine Control / Fuel System / ISG (Idle Stop & Go) System / Alternator Specification
| Item |
Specification |
|
| Rated voltage |
13.5V, 120A |
|
| Speed in use |
1,000 ~ 18,000 rpm |
|
| Voltage regulator |
IC Regulator built-in type |
|
| Regulator Setting Voltage |
External mode |
Refer to below graph |
| Internal mode |
14.55 ± 0.3V |
|
| Temperature Gradient |
External mode |
0 ± 3 mV / °C |
| Internal mode |
-3.5 ± 2mV / °C |
|
※ Regulator Setting Voltage (External mode)
Alternator Description
The charging system included a battery, an alternator with a built-in
regulator, and the charging indicator light and wire.
The Alternator has eight built-in diodes, each rectifying AC curre ...
Alternator On-vehicle Inpection
•
Check that the battery cables are connected to the correct
terminals.
...
See also:
Front Seat Assembly Component Location
1. Front seat assembly
...
Troubleshooting
Trouble Symptom
Probable cause
Remedy
Vehicle pulls to one side
Scoring of driveshaft ball joint
Replace
Wear, rattle or scoring of wheel b ...
Crankshaft Position Sensor (CKPS) Inspection
1.
Check signal waveform of CKPS and CMPS using a scan tool.
Specification:
Refer to “Waveform”
...
Copyright © www.kifomanual.com 2014-2025