Kia Forte: Clutch Release Cylinder

Installation

1. Install in the reverse order of removal. 2. After be equipped, perform bleeding air procedure in clutch release cylinder after pouring ...

Components

1. Union bolt 2. Gasket 3. Tube joint 4. Clutch tube 5. Valve plate 6. Valve spring 7. Bleeder screw 8. Release cylinder 9. Return spring 10. Piston 11. Bo ...

See also:

Compressor Disassembly
1. Remove the front right side tire. 2. Remove the engine room side cover (A). 3. Remove the wheel guar ...

Smart Key Unit Installation
Smart Key Unit 1. Install the smart key unit and RF receiver. 2. Connect the connector and install the smart key unit. ...

General
1. Basically, all measurements in this manual are taken with a tracking gauge. 2. When a measuring tape is used, check to be sure there is ...