Kia Forte: Concentric Slave Cylinder Assembly

Installation

1. Install the boot (A). 2. Install the clip to the clutch release fork. 3. Apply to grease in location ...

Component

1. Concentric slave cylinder assembly 2. Manual transaxle ...

See also:

Rear Wheel Speed Sensor Removal
1. Remove the rear wheel and tire. Tightening torque: 88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft) ...

Blower Motor Replacement
1. Disconnect the negative (-) battery terminal. 2. Disconnect the connector (A) of the blower motor. 3. Remove ...

Rear Torsion Beam Axle Inspection
1. Check the hub for cracks and the splines for wear. 2. Check the rear axle carrier for cracks. ...