Kia Forte: Installation - Manual Transaxle - Manual Transaxle System - Kia Forte TD 2014-2018 Service ManualKia Forte: Installation

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Manual Transaxle System / Manual Transaxle / Installation

  
If the oil seal on the transaxle case side is damaged and fluid is leaking, replace the oil seal with a new unit. When installing the new oil seal, use the specialized tool (oil seal installer, 09453-2F300).

1.
Install in the reverse order of removal.
2.
Adding manual transaxle fluid after Installing the manual transaxle.
(Refer to Manual Transaxle System - "Manual Transaxle Fluid")
Removal
1. Remove the air cleaner assembly. (Refer to Engine Mechanical System - "Air Cleaner") 2. Remove the battery and battery tray ...

Back-up Lamp Switch
...

See also:

Fluid Replacement
   ATF of the 6-speed automatic transaxle does not need to be replaced for Normal Usage. If the vehicle is used for any of ...

Rearview camera
The rear view camera will activate with the ignition switch on and the shift lever in the R (Reverse) position. Note- during initial start up, system may not display instantly due to the audio ...

Start/Stop Button Removal
1. Disconnect the negative (-) battery terminal. 2. Using a screwdriver or remover, remove the center garnish [LH] (A). ...

Copyright www.kifomanual.com 2014-2026