Kia Forte: Special Service Tools
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Automatic Transaxle System / Special Service Tools
| Tool (Number and Name) |
Illustration |
Use |
| 09200-3N000 Engine support fixture (Beam) |
|
Removal and installation of the transaxle. Use this adapter (SST No. : 09200-4X000) with the supporter (SST No. : 09200-2S000). ※Permit operating with 09200-38001. |
| 09200-2S000 Engine support fixture (Supporter) |
|
Removal and installation of the transaxle. Use this beam (SST No. : 09200-38001/3N000) with the supporter (SST No. : 09200-2S000) and adapter (SST No. : 09200-4X000). |
| 09200-4X000 Engine support fixture (Adapter) |
|
Removal and installation of the transaxle. Use this beam (SST No. : 09200-38001/3N000) with the supporter (SST No. : 09200-2S000). |
| 09452-26100 Oil seal installer |
|
Installation of transaxle case oil seal. [Using with handle (SST No.09231-H1100)] |
| 09231-H1100 Bar |
|
Installation of transaxle case oil seal. [Using with oil seal installer (SST No.:09452-26100)] |
| 09480-A3800 Inhibitor switch guide pin |
|
※ Engine support fixture special tool assembly drawing
| 1. 09200-3N000(Main bar) 2. 09200-3N000(Sub bar) 3. 09200-3N000(Handle) 4. 09200-3N000(Stopper) 5. 09200-3N000(Bolt-1) 6. 09200-4X000 (Adapter) 7. 09200-2S000(Supporter) 8. 09200-2S000(Supporter) 9. 09200-3N000(Nut) |
10. 09200-3N000(Snap ring) 11. 09200-3N000(Sub fixture) 12. 09200-3N000(Stopper) 13. 09200-3N000(Nut) 14. 09200-2S000(Spacer) 15. 09200-2S000(Sub fixture) 16. 09200-2S000(Nut) 17. 09200-3N000(Pin) |
Lubricants
Item
Specified lubricant
Quantity
Transaxle fluid
ATF SP-Ⅳ or equivalent
7.3L
(1.93 U.S gal., 7.71 U.S.qt., 6.42 Imp.qt ...
See also:
Transaxle Control Module (TCM) Replacement
1.
Turn ignition switch OFF.
2.
Disconnect the negative (-) battery cable.
3.
Disconnect the TCM connector (A ...
Adjustment
(5Door)
1.
After loosening the tail gate hinge (A) mounting bolt, adjust
the tail gate by moving it up or down, or right or left.
2.
...
Room Lamp Installation
Room Lamp
1.
Reconnect the connector.
2.
Install the room lamp assembly.
3.
Install the lens.
...
Copyright © www.kifomanual.com 2014-2025