Kia Forte: Description

The hydraulic system consists of oil, an oil filter, an oil pump, and a valve body (valves and solenoid valves). The oil pump is powered by the engine. Automatic Transaxle Fluid (ATF) passes through the oil filter and gets distributed along the oil channels. The oil becomes highly pressurized as it exits the oil pump and passes through the line pressure valve before being fed to the clutch & brake control valve, clutch, and brakes. Transaxle Control Module (TCM) controls the hydraulic pressure using solenoid valves and controls clutch and brake operations.

Hydraulic System

...

Components Location

1. Radiator 2. Mounting insulator 3. Valve body cover 4. Oil cooler tube 5. Automatic transaxle 6. Radiator upper mounting bracket 1. Automatic tra ...

See also:

Purge Control Solenoid Valve (PCSV) Removal
1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Disconnect the purge control solenoid valve connector (A) ...

Front Door Outside Handle Component Location
(4Door, 5Door, 2Door) 1. Front door outside handle ...

Warning Messages
Shift to "P" position (for smart key system and automatic transaxle) This warning message illuminates if you try to turn off the engine without the shift lever in P (Park) position ...