Kia Forte: Input Speed Sensor Description

Input speed sensor is a vital unit that measures the rate of rotation of the input shaft inside the transaxle and delivers the readings to the Transaxle Control Module(TCM). The sensor provides critical input data that's used in feedback control, damper clutch control, gear setting control, line pressure control, clutch activation pressure control, and sensor fault analysis.

Transaxle Oil Temperature Sensor Installation

1. Install in the reverse order of removal.    After replacement or reinstal ...

Input Speed Sensor Specifications

▷ Type: Hall effect sensor Operation condition [°C(°F)] ((-)40 ~ 150)) -40 ~ 302 Air gap(mm)in. (1.2 ~ 1.8) 0.0472 ~ 0.0709 Output voltage(V ...

See also:

Starter Disassembly (NON-ISG Type)
1. Disconnect the M-terminal (A) on the magnet switch assembly. 2. After loosening the screws (A), detach the magnet switch ssembly ...

Component Replacement After Deployment
   Before doing any SRS repairs, use the GDS Pro to check for DTCs. Refer to the Diagnostic Trouble Code list for repairing ...

Replacement
Rear Brake Pads 1. Remove the rear wheel & tire. Tightening torque: 88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft ...