Kia Forte: Input Speed Sensor Specifications
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Input Speed Sensor Specifications
▷ Type: Hall effect sensor
| Operation condition [°C(°F)] |
((-)40 ~ 150)) -40 ~ 302 |
|
| Air gap(mm)in. |
(1.2 ~ 1.8) 0.0472 ~ 0.0709 |
|
| Output voltage(V) |
High |
1.18 ~ 1.68 |
| Low |
0.59 ~ 0.84 |
|
Input Speed Sensor Description
Input speed sensor is a vital unit that measures the rate of rotation
of the input shaft inside the transaxle and delivers the readings to the Transaxle
Control Module(TCM). The sensor provid ...
See also:
Timing Chain Installation
1.
Check that the TDC marks on the intake and exhaust CVVT sprockets
are slightly turned (about 2 to 3 teeth) from the TDC position after
the timing chain has been rem ...
Seat Belt Pretensioner (BPT)
The Seat Belt Pretensioners (BPT) are installed inside Center Pillar (LH
& RH). When a vehicle crashes with a certain degree of frontal impact, the pretensioner
seat belt helps to reduce ...
Tire Removal
1.
Remove valve core and deflate the tire.
2.
Remove the side of the tire bead area from the wheel using tire
changing machine .
...
Copyright © www.kifomanual.com 2014-2025