Kia Forte: Input Speed Sensor Description

Input speed sensor is a vital unit that measures the rate of rotation of the input shaft inside the transaxle and delivers the readings to the Transaxle Control Module(TCM). The sensor provides critical input data that's used in feedback control, damper clutch control, gear setting control, line pressure control, clutch activation pressure control, and sensor fault analysis.

Transaxle Oil Temperature Sensor Installation

1. Install in the reverse order of removal.    After replacement or reinstal ...

Input Speed Sensor Specifications

▷ Type: Hall effect sensor Operation condition [°C(°F)] ((-)40 ~ 150)) -40 ~ 302 Air gap(mm)in. (1.2 ~ 1.8) 0.0472 ~ 0.0709 Output voltage(V ...

See also:

DC/DC Converter Removal
1. Disconnect the battery negative (-) cable. 2. Remove the crash pad lower panel. (Refer to Body - Crash pad lower panel.) ...

Blower Resistor Replacement
1. Disconnect the negative (-) battery terminal. 2. Disconnect the blower resistor connector (A) and then remove the blower resistor (B) af ...

ETC (Electronic Throttle Control) System Specification
Throttle angle (°) Output voltage (V) [Vref = 5.0V] TPS1 TPS2 0 0.5 4.5 10 0.96 4.05 20 1.41 ...