Kia Forte: 26 Brake Control Solenoid Valve(26/B_VFS) Description

26 Brake(26/B) Control Solenoid Valve is attached to the valve body. This variable force solenoid valve directly controls the hydraulic pressure inside the 26 Brake.

Torque Converter Control Solenoid Valve (T/CON_VFS) Installation

1. Install in the reverse order of removal.    • Adding Automat ...

26 Brake Control Solenoid Valve(26/B_VFS) Specifications

Direct control VFS[26/B] ▷ Control type : Normal low type Control Pressure kpa (kgf/cm², psi) 9.81 ~ 500.14 (0.1 ~ 5.1, 1.42 ~ 72.54) Current value(mA) ...

See also:

Components Operations
ECM (Engine Control Module) 1. The ECM(PCM) (A) carries out a check of the ignition key using a special encryption algorithm, which is programmed into the transponder ...

Inhibitor Switch Installation
1. Check that the shift lever is placed in the "N" position 2. Install the inhibitor switch (A). ...

Description
Component location : Manual transaxle case Operation principle : Back up lamp switch is pushed by the reverse lug sliding when select arm, and switches the back up lamp. Funct ...