Kia Forte: SS-A Solenoid Valve(ON/OFF) Description

Shift Solenoid(SS) Valve-A is attached to the valve body and is an on/off solenoid valve that is used to change gears. Shift Solenoid(SS) Valve-A is installed at valve body.

Overdrive Clutch Control Solenoid Valve(OD/C_VFS) Removal

   Replacing an on/off solenoid valve (SS-A, SS-B) does not require additional hydraulic pressure adjustment; however, the ...

SS-A Solenoid Valve(ON/OFF) Specifications

ON/OFF Solenoid Valve(SS-A, SS-B) ▷ Control type : Normal low type Control pressure kpa (kgf/cm², psi) 490.33(5.0, 71.12)  Internal resistance(Ω ...

See also:

Front Wiper Motor Component Location
1. Cap 2. Nut 3. Wiper arm & blade 4. Retainer 5. Cowl top cover 6. Bolt 7. Wiper motor & linkage assembly ...

Battery Sensor Installation
1. Install in the reverse order of removal. Battery sensor cable installation bolt: 10.8 ~ 13.7 N.m (1.1 ~ 1.4 kgf.m, 8.0 ~10.1 lb-ft) ...

Inpection
1. Measure a resistance of NTC and Heated pad. A. NTC resistance - 10.0 kΩ ± 10% (25°C) B. H ...