Kia Forte: SS-A Solenoid Valve(ON/OFF) Specifications - Automatic Transaxle Control System - Automatic Transaxle System - Kia Forte TD 2014-2018 Service ManualKia Forte: SS-A Solenoid Valve(ON/OFF) Specifications

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / SS-A Solenoid Valve(ON/OFF) Specifications

ON/OFF Solenoid Valve(SS-A, SS-B)
▷ Control type : Normal low type
Control pressure kpa (kgf/cm², psi)
490.33(5.0, 71.12)
 Internal resistance(Ω)
10 ~ 11

SS-A Solenoid Valve(ON/OFF) Description
Shift Solenoid(SS) Valve-A is attached to the valve body and is an on/off solenoid valve that is used to change gears. Shift Solenoid(SS) Valve-A is installed at valve body. ...

SS-A Solenoid Valve(ON/OFF) Circuit Diagram
...

See also:

Front Stabilizer Link Replacement
1. Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely supported. 2. Remove the front wheel and tire (A ...

Removal
1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad lower panel. (Refer to Body - "Crash Pad Low Panal") ...

Brake Booster Vacuum Pressure Sensor Description
In order to ensure adequate brake power assistance in every situation, the brake booster is equipped with a partial vacuum sensor. The brake booster vacuum pressure sensor is located beside t ...

Copyright © www.kifomanual.com 2014-2025