Kia Forte: Front Strut Assembly Disassembly
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Suspension System / Front Suspension System / Front Strut Assembly Disassembly
| 1. |
Using the special tool (09546-26000), compress the coil spring
(A).
|
| 2. |
Remove the self-locking nut (C) from the strut assembly (B).
|
| 3. |
Remove the insulator, spring seat, coil spring and dust cover
from the strut assembly.
|
| 4. |
Reassembly is the reverse of the disassembly.
|
Front Strut Assembly Replacement
1.
Loosen the wheel nuts slightly.
Raise the vehicle, and make sure it is securely supported.
2.
Remove the front wheel and tire (A ...
Front Strut Assembly Inspection
1.
Check the strut bearing for wear and damage.
2.
Check the spring upper and lower seat for damage and deterioration.
3.
...
See also:
Specification
Item
Description
Power source
3V
Operating temperature
-20°C ~ +60°C (-4°F ~ 140°F)
RF Modulation
FSK
LF Modulati ...
Fuel Filler Cap Description
A ratchet tightening device on the threaded fuel filler cap reduces the
chances of incorrect installation, which seals the fuel filler. After the gasket
on the fuel filler cap and the filler ...
ECM Problem Inspection Procedure
1.
TEST ECM GROUND CIRCUIT: Measure resistance between ECM and chassis
ground using the backside of ECM harness connector as ECM side check
point. If the problem is fo ...
Copyright © www.kifomanual.com 2014-2025