Kia Forte: Components Location

Rear Suspension System

...

Rear Alignment Adjustment

   When using a commercially available computerized wheel alignment equipment to inspect the rear wheel alignment, always p ...

See also:

In-car Sensor (DATC only) Inspection
1. Turn the ignition switch ON. 2. Blow air with changing temperature into the in-car sensor air inlet. Measure the sensor resistance betwe ...

IMS Control Switch Inspection
1. With the power seat switch in each position, make sure that continuity exists between the terminals below. If continuity is not as specified, replace the power seat ...

Relay Box (Passenger Compartment) Installation
1. Install the smart junction box. 2. Install the crash pad lower panel. 3. Check that all system operates norm ...