Kia Forte: Vacuum Pump

Installation

1. Install in the reverse order of removal.    A. ...

Removal

1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Disconnect the vacuum pump connector (A). ...

See also:

Auto Light Sensor Inspection
In the state of IGN1 ON, when multifunction switch module detects auto light switch on, tail lamp relay output and head lamp low relay output are controlled according to auto light sensor' ...

Inspection
1. Inspect diaphragm spring wear which is in contact with a clutch release bearing. 2. Check the clutch cover and disc surface for wear or ...

Output Speed Sensor Circuit Diagram
...