1. |
Using a clip remover, detach the clips, and remove the hood insulator
pad (A).
|
2. |
Install in the reverse order of removal.
|
Cluster Ionizer Inspection
1.
Press the MODE switch more then 4 times within 2 seconds while
pressing the OFF switch.
Display
Fail description
00 ...
Fuel Filter Installation
1.
Install in the reverse order of removal.
...
Crankshaft Damper Pulley Inspection
Check the crankshaft damper pulley for vibration in rotation, oil dust
deposit of V-ribbed part. Replace if necessary. ...