Kia Forte: Inspection

Removal

1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Remove the battery (A) and ECM (B). ...

Installation

1. Install in the reverse order of removal.    A. ...

See also:

[CVVT System Mode]
(1) Low Speed / Low Load (2) Part Load (3) Low Speed / High Load (4) High Speed / High Load ...

System settings
Press the key Select [System] Select menu through TUNE knob   Memory Information Displays currently used memory and total system memory. Select [Memory Information] OK ...

On-vehicle Inspection
Inspect ignition coil assembly and Perform spark test 1. Check for DTCs.    ...