Kia Optima Manuals

Kia Forte: Installation - Front Disc Brake - Brake System - Brake System - Kia Forte TD 2014-2018 Service ManualKia Forte: Installation

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Brake System / Brake System / Front Disc Brake / Installation

1.
Install in the reverse order of removal.
2.
Compress the piston into the caliper body using the SST(09581-11000).
3.
After installation, bleed the brake system.
(Refer to Brake system bleeding)
  
•
Do not hit piston end by hammer or prying directly against piston face with screwdriver to push in piston.
•
Using wood or used pad to protect piston end and pushing the wood or pad is recommended.
•
When spreading a piston, SST should be cover all area of piston end face.
Inspection
Front brake disc thickness check 1. Check the brake pads for wear and fade. 2. Check the brake disc for damage and cracks. ...

Rear Disc Brake
Components 1. Guide rod bolt 2. Bleed screw 3. Caliper carrier 4. Caliper body 5. Brake pad 6. Pad retainer ...

See also:

Battery Sensor Removal
1. Disconnect the battery negative (-) cable. 2. Disconnect the battery sensor connector (A). 3. Remove the bat ...

Power Mosfet Inspection
1. Turn the ignition switch ON. 2. Manually operate the control switch and measure the voltage of the blower motor. 3. ...

Tail Gate Trim Replacement
(5Door) [Tail gate upper trim]    • When prying with a flat-tip screwdri ...

Categories


Copyright © www.kifomanual.com 2014-2025