Kia Forte: Installation

Removal

1. Remove the air cleaner assembly. (Refer to Engine Mechanical System - "Air Cleaner") 2. Remove the battery and battery tray ...

Manual Transaxle Control System

...

See also:

Engine Coolant Temperature Sensor (ECTS) Inspection
1. Turn the ignition switch OFF. 2. Disconnect the ECTS connector. 3. Remove the ECTS. 4. ...

Installation
1. Install in the reverse order of removal.    If the oil seal on the transaxle case side is da ...

Starter Installation
1. Install in the reverse order of removal. Starter installation bolt: 49.0 ~ 63.7 N.m (5.0 ~ 6.5 kgf.m, 36.2 ~ 47.0 lb-ft) ...