Kia Forte: Manual Transaxle Control System

Installation

1. Install in the reverse order of removal.    Do not reuse the O-ring (A). ...

Shift Lever Components

1. Shift lever knob 2. Shift lever assembly 3. Shift cable assembly 4. Select cable assembly 5. Retainer ...

See also:

Alternator  Inspection
[Rotor] 1. Check that there is continuity between the slip rings (C). 2. Check that there is no continuity between the slip ...

Seat Belt Switch Inspection
1. Remove the connector from the switch. 2. Check for continuity between terminals. Seat belt condition Continu ...

Camshaft Position Sensor (CMPS) Inspection
1. Check the signal waveform of the CMPS and CKPS using the GDS. Specification: Refer to “Wave Form� ...