1. |
Disconnect the negative(-) battery terminal.
|
2. |
Remove the lens (A) after loosening the mounting screws.
|
3. |
Remove the license lamp (B) after disconnecting the connector
(A).
|
Ignition Coil Inspection
1.
Measure the primary coil resistance between terminals (+) and
(-).
Standard value:
0.75Ω ± 15%
...
26 Brake Control Solenoid Valve(26/B_VFS) Removal
Replacing an on/off solenoid valve (SS-A, SS-B) does not require
additional hydraulic pressure adjustment; however, the ...
Power Seat Control Switch Installation
1.
Connect the connector and install the power seat control switch.
2.
Install the seat cover.
...