1. |
Install the overhead console lamp after connecting the sunroof
switch connector and lamp connector.
|
2. |
Install the lens after tightening 2 screws.
|
Specification
Item
Description
Power source
3V
Operating temperature
-20°C ~ +60°C (-4°F ~ 140°F)
RF Modulation
FSK
LF Modulati ...
Heated Oxygen Sensor (HO2S) Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the HO2S connector.
3.
Measure resistance between the HO2S termi ...
On-board Refueling Vapor Recovery (ORVR) valve Removal
1.
Turn the ignition switch OFF, and then remove battery (-) cable.
2.
Remove the fuel pump.
(Refer to Fuel System - "Fuel Pump&qu ...