Kia Forte: Line Pressure Control Solenoid Valve Circuit Diagram

Line Pressure Control Solenoid Valve Specifications

Direct control VFS[Line Pressure] ▷ Control type : Normal high type Control Pressure kpa (kgf/cm², psi) 500.14 ~ 9.81 (5.1 ~ 0.1,72.54 ~ 1.42) Current val ...

Line Pressure Control Solenoid Valve Inspection

1. Turn ignition switch OFF. 2. Disconnect the Solenoid valve connector. 3. Measure resistance between sensor ...

See also:

Oil Cooler Inspection
Radiator Cap Testing 1. Remove the radiator cap, wet its seal with engine coolant, and then install it on a pressure tester. 2. ...

Smart Key Unit Component
Component (1) Connector Pin Information No. Connector A (24 pins) No. Connector B (20 pins) No. Connector C (18 pins) 1 VBAT CPU ...

Rear Combination Lamp Installation
1. Install the rear combination lamp (Inside) assembly. 2. Install the rear combination lamp (outside) assembly. ...